HP LSI MEGARAID SAS 8888ELP DRIVER DETAILS:

Type: Driver
File Name: hp_lsi_37736.zip
File Size: 32.6 MB
Rating:
3.73
24 (3.73)
Downloads: 19
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* (*Free Registration Required)

Download Now
HP LSI MEGARAID SAS 8888ELP DRIVER



Printed in the U. Any surface or area of the equipment marked with this symbol indicates the presence of an electrical shock hazard.

HP LSI MEGARAID SAS 8888ELP WINDOWS VISTA DRIVER

To reduce the risk of injury from electrical shock, do not open any enclosed area marked with this symbol. To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug.

HP LSI MegaRAID Sata/sas 8888elp PCIExpress 512mb RAM RAID

The grounding plug is an important safety HP LSI MegaRAID SAS 8888ELP. Plug the power cord in a grounded earthed outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging the power cord from the electrical outlet. Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching.

If a product is shipped in packaging marked with this symbol, the product must always be lifted by two persons to avoid personal injury due to product weight. It describes proper workstation setup, posture, health, and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located at and on the documentation CD if one is included with the product. Static electricity can damage the electronic components of the workstation. Before beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal object. To prevent damage to the workstation, observe the following Electrostatic Discharge ESD precautions while performing the system parts removal and replacement procedures: Work on a static-free mat.

Wear a static strap to ensure that any accumulated electrostatic charge is discharged HP LSI MegaRAID SAS 8888ELP your body to the ground.

LSI RAID Controller and HBA Complete Listing Plus OEM Models ServeTheHome and Forums

Create a common ground for the equipment you are working on by connecting the static-free mat, static strap, and peripheral units to that piece of equipment. HP accessories are for use HP LSI MegaRAID SAS 8888ELP HP Workstation products. They have been extensively tested for reliability and are manufactured to high quality standards. All illustrations are examples only.

HP LSI MEGARAID SAS 8888ELP WINDOWS 7 DRIVER DOWNLOAD

Download and install updates 1. Install the system BIOS updates, if available. Accessing the internal components of the workstation 1. Power down the workstation, and then disconnect the power cord. Power down all external devices, and then disconnect them from the workstation.

Remove the side access panel. If present, remove the card support to enable access to the expansion slots and system board connectors.

Select an appropriate PCIe expansion slot. For optimum performance, HP recommends installing the card in a PCIe-x8 or x16 expansion slot on the system board. The card can HP LSI MegaRAID SAS 8888ELP installed in a PCIe-x4 expansion slot, but performance is reduced. Ensure that the card is fully seated in the expansion slot. Close the expansion slot retention clamp to secure the card in the slot.

The data cable connections for RAID differ between workstation models. To determine the correct connection for your hard drives, identify the applicable HP workstation model and the location of the hard drive being connected in the following table. To connect existing hard drives, disconnect the existing single data cables from the system board, and then choose the correct connection type. Table 1 Data cable configuration guide HP workstation model Location of hard drive Connection type Description HP xw Workstations HP Workstations Internal hard drive bay Standard data cable connections on page 9 Use the long 4-port data cable with degree connectors provided in this kit to connect the hard drives to the RAID controller card. HP xw Workstations HP Workstations Optical bay Standard data cable connections on page 9 Use the long 4-port data cable with straight connectors provided in this kit to connect the hard drives to the RAID controller card.

This document describes how to install the LSI MegaRAID® SAS ELP Host – Hewlett-Packard Development Company, L.P. MegaRAID is a. HP LSI MegaRAID SAS 8888ELP LSI MegaRAID SAS ELP Driver for Microsoft Windows Vista (bit E DESCRIPTION: This package contains the LSI MegaRAID SAS driver for the HP xw Workstation: All Models HP xw Workstation: All Models HP.

Other Drivers