ASUS A55BM-PLUS ASMEDIA USB 3.0 DRIVER DETAILS:
|File Size:||34.8 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
ASUS A55BM-PLUS ASMEDIA USB 3.0 DRIVER
Visit the ASUS website at: The following sub sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards.
Failure to do so may cause you physical injury and damage motherboard components Installing an expansion card To install an expansion card: Before installing the expansion card, read the documentation that came ASUS A55BM-PLUS ASMedia USB 3.0 it and make the necessary hardware settings for the card. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket opposite the slot that you intend to use. Keep the screw for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
NEW ASUS A55BM-PLUS CSM AMD A55 FM2+ Socket APU HDMI DVI Micro ATX Motherboard - $ PicClick
Secure the card to the chassis with the screw you removed earlier. ASUS A55BM-PLUS ASMedia USB 3.0 the system cover Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. Turn on the system and change the necessary BIOS settings, if any. Assign an IRQ to the card. Install the software drivers for the expansion card. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable Chapter 1: Product introduction 19 1.
Turn OFF the computer and unplug the power cord. Move the jumper cap from pins default to pins Keep ASUS A55BM-PLUS ASMedia USB 3.0 cap on pins for about seconds, then move the cap back to pins Plug the power cord and turn ON the computer.
Removing the cap will cause system boot failure! After clearing the CMOS, reinstall the battery.
Asmedia and Other drivers drivers
You do not need to clear the RTC when the system hangs due to overclocking. Shut down and reboot the system, then the BIOS automatically resets parameter settings to default values Chapter 1: Product introduction 21 1. This is ideal for overclockers and gamers who continually change settings to enhance system performance. Press and hold the MemOK!
Asus A55BM-PLUS User Manual
During the tuning process, the system loads and tests failsafe ASUS A55BM-PLUS ASMedia USB 3.0 settings. It takes about 30 seconds for the system to test one set of failsafe settings. If the test fails, the system reboots and tests the next set of failsafe settings. Due to memory tuning requirement, the system automatically reboots when each timing set is tested. To stop memory tuning, turn off the computer and unplug the power cord for about 5 10 seconds. If an error is found, the LED next to the error device will continue lighting up until the problem is solved.
Product introduction 23 1. Line In port light blue. Line Out port lime. This port connects to a headphone or a speaker. This port connects to a microphone. Refer to the audio configuration table on the next page for the function of the audio ports in 2. Use a chassis with HD audio module in the front panel to support an 8-channel audio output. Due to USB 3.
We strongly recommend that you connect USB 3. This port is for any DVI-D compatible device. Product introduction 25 1. Insufficient air flow inside the system may damage the motherboard components.
These are not jumpers! DO NOT place jumper caps on the fan connectors. Connect one end of the chassis intrusion sensor or switch cable to this connector. Specifications: CPU: AMD Socket FM2+ Athlon/A- Series Processors - Supports CPU up to 4 cores - Supports AMD Turbo Core ASUS A55BM-PLUS motherboards feature the AMD ASUS A55BM-PLUS ASMedia USB 3.0 chipset supporting FM2+ APUs with AMD Radeon™ HD / Series ASMedia® ASM controller: 3 x USB connector(s) support(s) additional 6 USB port(s).