AIR802 AP-G300 DRIVER DETAILS:
|File Size:||32.8 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
AIR802 AP-G300 DRIVER
It is completely weatherproof. No electric outlet required at the installation site with the unit being powered through power-over-Ethernet PoE technology.
The AP-G generally will be mast mounted. The AP-G does not ship with an antenna.
Wireless LAN Device Series AP-G User Manual - PDF
You have the full flexibility to choose the most appropriate antenna Air802 AP-G300 your installation. Mounted in the bottom side is an N female type connector.
Choose an antenna or cable assembly with an N male connector. With bridge operation mode, you can directly connect the Air802 AP-G300 Ethernet port to your PC and the AP-G becomes a wireless client or adapter.
When this mode is selected, it is not broadcasting an SSID and wireless clients can t survey and connect Air802 AP-G300 the device. This would not ordinarily be disabled. Band The options are: See the full description Air802 AP-G300 details of each of these in the preceding section. Network Type 1. All communication is done via the AP. Ad Hoc This type provides a peer-to-peer communication between wireless stations. All the communication is done from Client to Client without any Access Point involved. SSIDs are case sensitive and can contain up to 32 alphanumeric characters.
Channel Number The following table lists the available frequencies in MHz for the 2. Channel No. The system ships with channels 1 through 11 enabled. If you are located in a country that allows channels 12, 13 and 14, you can contact AIR for information on enabling the additional channels. Useful information such as the as MAC address, transmission information and signal level is provided. This function Air802 AP-G300 not used in most applications. In this mode, the AP-G can be configured as a repeater to connect to another AP and simultaneously re-broadcast the signal locally.
Essentially, this will extend the available wireless range of another AP and let the user link to the network that they want. If you do not control or own the remote AP, then Universal Repeater Air802 AP-G300 the correct choice. To configure Universal Repeater: Click Enable Universal Repeater Mode 2. Click Apply Changes. Wireless Advanced Settings These settings are only for more technically advanced users who have sufficient knowledge about wireless LAN.
SAIL THE WORLD
These settings should not be changed unless you know what effect the changes will have on your device. The default settings Air802 AP-G300 optimized for normal operation.
Any unreasonable value change to a default setting will reduce the throughput of the device. The default setting is Auto. Fragment Threshold The fragmentation threshold determines the size at which packets are fragmented sent as several pieces instead of as one block. Air802 AP-G300 22, - two cables: the RJ network cable to Ethernet port of AP-G figure of “AP-G RF Cable Connection” and connect the ground wire as. AP-G Multi-Function WLAN AP. User Manual. Version (November ) Connect the Ethernet network cable to Ethernet port of AP-G
|Asus ROG G752VM Genesys Card Reader||Air 802 AP-G300 Wireless LAN Device Series Multi-Function WLAN AP ASIS UNTESTED|
|Samsung SCX-4100 Printer Universal Print||Blog Archive|
|Sony BDV-IT1000 Home Theatre System||Shop by category|
|Lenovo IdeaPad U410 Touch YouCam Camera||Shop with confidence|